Drag 1300 Build Service Includes:

This transmission is built for Drag Racing, Road Racing and daily street use! This service will address TSBs, 1st Gear Failures, 2-6 Gear Failures, Seal and Clutch Issues, ETS Failures, Clutch Basket and Retaining Clip Failures. The unit will operate flawlessly at 1700hp/1400 torque and shift smooth with our 'Waffle' clutch system.

This build service includes our highest quality parts. The gear set and clutch system allows this trans to operate smoothly and quietly making it a great option for daily use on the street, yet do everything you need at the track.

All services are performed in-house. Shipping your transmission (or complete car) to us is simple! Please email or call us for a quote.

Specs

Jacks Transmissions has grown into a company which now services exotic and terribly complex DCT (dual clutch transmissions) used in the GTR, SST, Porsche, Audi, VW, and many more high end vehicles. Due to this exciting change, we have spent a lot of money for the state-of-the-art equipment needed to service these high dollar and expensive units. We have also designed and built many of our own parts for these vehicles.

All machine work, cleaning, and detail work is performed in-house by very talented technicians and engineers. The quality you get from Jacks Transmissions is an unbelievable bargain. We do not know of anyone else who cleans the transmission via a 110gal Ultrasonic and Pulse-Jet unit, or who employs such talented people.

Exceptionally clean units are one of the many reasons why our Transmissions and Transfer Case assemblies are of the highest quality in the business! We have state-of-the-art cleaning equipment which other transmission builders and service shops could only dream of.

With the best cleaning equipment, we also have a very clean facility. All units are built in a spotless environment using tools, and benches, which are clean and only used for assembly purposes. In other words, the same tools used to pull your dirty old transmission out of your car are NOT the same tools used to rebuild your pristine unit afterward. Take a look at the typical shop and check their tools. It is shocking how dirty things are in most shops and that dirt will end up in your unit. That does not happen here.

The quality and experience you get from Jacks Transmissions shows with the overwhelming number of high-end vehicles we service in our shop. Be a part of the rare opportunity to have one of the cleanest and most experienced specialty shops in the World service your transmission!

Our pricing structure was created to assure only the highest quality materials and workmanship. Anyone which beats our price is taking short-cuts which you will pay for in the end. Look into the details of our build services and you will see the additional attention we provide which is unique and cannot be duplicated.

CORE EXCHANGE SERVICE

Please EMAIL us for price and availability. Many of the build services we offer can be performed on an 'exchange' basis. Core charges and core convenience fees are separate from the costs of the build service. In many cases, core fees can be refunded pending the condition of what we receive in exchange. Note: We will retain a 10% convenience for this service.

Optional Upgrades

Please email us if you have any questions or would like to change anything offered in this service to fit your needs.

Additional Information

We make it easy! This transmission ships filled and fully tested! Yes, you read that right and we are the only company to perform this service.

We install, test and run each GR6 before it leaves our facility. We have 2 test-mule GTRs here purely for this purpose. The tests performed are:

  1. Warm-Up and Relearn Pass
  2. Data Log Pressures vs. Target Pressures (to assure all assemblies are working properly) HERE
  3. Test drive on the street to assure proper function and 'feel'.

You will never get a malfunctioning GR6 from us!

Please read about the rebuild process HERE

HEAVILY WORN OR DAMAGED UNITS

Any additional parts needed which are not listed or not part of this build will cost extra to replace. We will email pictures and detailed information if this is the case. We know you do not like surprises, so we try to make this process as painless as possible. If this turns out to be the case, though, please keep in mind that we just want you to have a high quality built assembly. Having your vehicle down is bad enough, so why cut corners and risk it again? Quality is the key here and sometimes it costs more to do this on a specialty or aging platform. Simply put, it is not worth the risk of using a sub-par component if an inspection reveals it is a weak link.

ATTENTION TO DETAIL

All machine work and cleaning is performed in-house. We also spend a lot of time on synchro timing, alignment and operation to give you the best shift possible. Click -> Synchro Blueprinting

SHIPPING

Shipping your Transmission (or complete car) to us is simple! Most assemblies are shipped in a double walled custom made box. Your assembly will be sitting snugly, and safely, in preformed foam pads to assure safe delivery.

In certain situations, though, we may need ship via a freight pallet. Please email or call us if you have shipping questions or for a quote.

Additional Information

We make it easy! This transmission ships filled and fully tested! Yes, you read that right and we are the only company to perform this service.

We install, test and run each GR6 before it leaves our facility. We have 2 test-mule GTRs here purely for this purpose. The tests performed are:

  1. Warm-Up and Relearn Pass
  2. Data Log Pressures vs. Target Pressures (to assure all assemblies are working properly) HERE
  3. Test drive on the street to assure proper function and 'feel'.

You will never get a malfunctioning GR6 from us!

Please read about the rebuild process HERE

HEAVILY WORN OR DAMAGED UNITS

Any additional parts needed which are not listed or not part of this build will cost extra to replace. We will email pictures and detailed information if this is the case. We know you do not like surprises, so we try to make this process as painless as possible. If this turns out to be the case, though, please keep in mind that we just want you to have a high quality built assembly. Having your vehicle down is bad enough, so why cut corners and risk it again? Quality is the key here and sometimes it costs more to do this on a specialty or aging platform. Simply put, it is not worth the risk of using a sub-par component if an inspection reveals it is a weak link.

ATTENTION TO DETAIL

All machine work and cleaning is performed in-house. We also spend a lot of time on synchro timing, alignment and operation to give you the best shift possible. Click -> Synchro Blueprinting

SHIPPING

Shipping your Transmission (or complete car) to us is simple! Most assemblies are shipped in a double walled custom made box. Your assembly will be sitting snugly, and safely, in preformed foam pads to assure safe delivery.

In certain situations, though, we may need ship via a freight pallet. Please email or call us if you have shipping questions or for a quote.

Additional Information

We make it easy! This transmission ships filled and fully tested! Yes, you read that right and we are the only company to perform this service.

We install, test and run each GR6 before it leaves our facility. We have 2 test-mule GTRs here purely for this purpose. The tests performed are:

  1. Warm-Up and Relearn Pass
  2. Data Log Pressures vs. Target Pressures (to assure all assemblies are working properly) HERE
  3. Test drive on the street to assure proper function and 'feel'.

You will never get a malfunctioning GR6 from us!

Please read about the rebuild process HERE

HEAVILY WORN OR DAMAGED UNITS

Any additional parts needed which are not listed or not part of this build will cost extra to replace. We will email pictures and detailed information if this is the case. We know you do not like surprises, so we try to make this process as painless as possible. If this turns out to be the case, though, please keep in mind that we just want you to have a high quality built assembly. Having your vehicle down is bad enough, so why cut corners and risk it again? Quality is the key here and sometimes it costs more to do this on a specialty or aging platform. Simply put, it is not worth the risk of using a sub-par component if an inspection reveals it is a weak link.

ATTENTION TO DETAIL

All machine work and cleaning is performed in-house. We also spend a lot of time on synchro timing, alignment and operation to give you the best shift possible. Click -> Synchro Blueprinting

SHIPPING

Shipping your Transmission (or complete car) to us is simple! Most assemblies are shipped in a double walled custom made box. Your assembly will be sitting snugly, and safely, in preformed foam pads to assure safe delivery.

In certain situations, though, we may need ship via a freight pallet. Please email or call us if you have shipping questions or for a quote.

Write a review

Please login or register to review

*Drag 1300* 1700WHP Complete Build Service - GR6

  • Brands Nissan
  • Product Code: GR6 1700
  • Availability: In Stock
  • $17,900.00


Tags: GTR Rebuild

Contact Us

Whether you need a part to complete your build or want us to do it from the ground up, we've got you covered.
Let us take your project 'from Start to FINISH!'

Find Our Shop

Follow Us

     

3920 North Weber Street Colorado Springs, CO, 80907

Hours: Mon-Fri 8:30AM-7PM MT

CALL US  |  CONTACT US  |  SITEMAP

Quicklinks