• Transfer Case Sleeve - 3S

This is a replacement input sleeve / coupler for the Getrag transfer case. If your input sleeve has worn splines, it must be replaced to prevent stripping the splines and the consequential costly failure of the central differential viscous coupling unit. It is also a good idea to check the splines on the output shaft. If both pieces have wear, but only one is replaced, it will could damage the new component!

Installation of this sleeve requires a hydraulic press.

NOTE: For 91-92, 18-spline only; If the transfer case has a bolt in the middle of the cover near the “e” in “Getrag”, then you need a “large bearing” sleeve. If no bolt then “small bearing”.

Please choose 18 Spline (5-Speed), 25 Spline (5-Speed), or 25 Spline (6-Speed) below.

Write a review

Please login or register to review

Transfer Case Sleeve - 3S

  • Brands Mitsubishi
  • Product Code: Supercar Eng [Sleeve-Xfer]
  • Availability: In Stock
  • $240.00


Available Options


Tags: 3000gt, 3S Parts, coupler, input spool, stealthtt

Contact Us

Whether you need a part to complete your build or want us to do it from the ground up, we've got you covered.
Let us take your project 'from Start to FINISH!'

Find Our Shop

3920 North Weber Street Colorado Springs, CO, 80907

Hours: Mon-Fri 8:30AM-7PM MT

CALL US  |  CONTACT US  |  SITEMAP

Follow Us

     

logo